ACO - El futuro
de drenaje
SK Catch Basin
4" (100mm) wide
8" (200mm) wide
12" (300mm) wide
Catch Basins
A catch basin is usually put at the point that the trench drain evacuates the water into the underground pipework. They can be placed at the end of the trench run, or at any point along the trench run - depending on the underground pipe location and the ground topography.
SK900 Series
SK620 Series
SK630 Series
Rubberized plastic ends
to connect channels.
Riser
can be cut down to adjust height.
Side drill-outs
allow connection to other channels.
Variety of 4",6",8"
schedule 40 spigots.
Polymer Concrete
a durable material made from polyester resin binder reinforced by mineral aggregates and fillers
Spigot to match ACO Foul Air Trap
are available on all catch basin systems.
PowerLok
patented, boltless locking system provides quick fitting and removal of grates. Available in all SK Catch Basin Systems.
Ductile iron edge rail-
integrally cast-in rail provides maximum strength and protection for channel body. Shock absorbing widgets, with M10 stainless steel threads, are fitted in rail to assist with grate fit and aid hanging installation.
In line Catch Basin
Point Catch Basin
In line trash buckets
fit the 900 series in line catch basin for the 4" and 8" systems.
Shallow trash bucket
fit the 620 series point catch basin and 900 series for 12" systems.
Deep trash buckets
fit the 630 series point catch basin and 900 series for the 12" systems.
All trash buckets are supported within the polymer concrete top section.
Catch Basins- to suit SK100
Catch Basins are available with integrally cast in ductile iron (D) edge rails. Grates are secured with the PowerLok system.
4" (100mm) wide Trench Drain Catch Basin Parts Lists100k-table S100K Catch Basins Parts table
Part No
Weight lbs
Grate Slot.
Gr. Long-ADA
Grate Slot.
Gr.Long-ADA
S1K-901D In-line catch basin - 19.69” (0.5m)
94610
94613
99.0
100.3
S1K-621D catch basin - 19.69” (0.5m)
94573
94574
88.7
102.7
S1K-631D catch basin - 19.69” (0.5m)
94583
94584
98.7
112.7
Type 600 Optional riser
99902 10.0
Foul air trap - fits both 910 & 610 basins
90854
1.2
4" (100mm) wide Catch Basin Supporting DocumentsSpecification Information Sheets
PowerDrain- S100K iron edged channel system with longitudinal grate (ADA)
PowerDrain- S100K iron edged channel system with slotted grate
SK1-621D Catch Basin with longitudinal ductile iron grate (ADA)
SK1-621D Catch Basin with slotted ductile iron grate
SK1-631D Catch Basin with longitudinal ductile iron grate (ADA)
SK1-631D Catch Basin with slotted ductile iron grate
FAT - Foul Air Trap - 4" pipe size only1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
SK1-901D
SK1-621D
SK1-631D
28.45" (722.5mm)
41.11" (1044.3mm)
29.11" (739.5mm)
Catch Basins- to suit SK200
Catch Basins are available with integrally cast in ductile iron (D) edge rails. Grates are secured with the PowerLok system.
SK2-902D
SK2-621D
SK2-631D
8" (200mm) wide Trench Drain Catch Basin Parts Lists200k-table S200K Catch Basins Parts table
Part No
Weight lbs
Grate Slot.
Gr. Long-ADA
Grate Slot.
Gr.Long-ADA
S2K-902D In-line catch basin - 19.69” (0.5m)
94616
94619
109.8
106.1
S2K-621D catch basin - 19.69” (0.5m)
94575
94576
144.0
158.0
S2K-631D catch basin - 19.69” (0.5m)
94579
94580
154.0
168.0
Type 600 Optional riser
99902 10.0
Foul air trap - fits both 910 & 610 basins
90854
1.2
8" (200mm) wide Trench Drain Catch Basin Supporting DocumentsSpecification Information Sheets
PowerDrain – S200K iron edged channel system with longitudinal grate (ADA)
PowerDrain- S200K iron edged channel system with slotted grate
SK2-621D Catch Basin with longitudinal ductile iron grate (ADA)
SK2-621D Catch Basin with slotted ductile iron grate
SK2-631D Catch Basin with longitudinal ductile iron grate (ADA)
FAT - Foul Air Trap - 4" pipe size only1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
33.18" (842.7mm)
37.64" (956mm)
49.63" (1260.8mm)
SK3-903D
SK3-904D
Catch Basins- to suit SK300
Catch Basins are available with integrally cast in ductile iron (D) edge rails. Grates are secured with the PowerLok system.
12" (300mm) wide Trench Drain Catch Basin Parts Lists200k-table S300K Catch Basins Parts table
Part No
Weight lbs
Grate Slot.
Gr. Long-ADA
Grate Slot.
Gr.Long-ADA
S3K-903D In-line catch basin - 19.69” (0.5m)
94622
94572
151.4
165.4
S3K-904D In-line catch basin - 19.69” (0.5m)
94581
94582
161.4
175.4
Type 600 Optional riser
99902 10.0
Foul air trap - fits both 910 & 610 basins
90854
1.2
12" (300mm) wide Trench Drain Catch Basin Supporting Documents
FAT - Foul Air Trap - 4" pipe size only1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
37.64" (956mm)
49.63" (1260.8mm)
Productos
Sistemas para profundidad restringida.
Los productos siguientes se pueden utilizar en una variedad de aplicaciones con requisitos especiales para la instalacion de drenaje.
Clic en esta barra para ver los productos.
