ACO - El futuro
de drenaje
Catch Basin
4" (100mm) wide
8" (200mm) wide
12" (300mm) wide
Catch Basins
A catch basin is usually put at the point that the trench drain evacuates the water into the underground pipework. They can be placed at the end of the trench run, or at any point along the trench run - depending on the underground pipe location and the ground topography.
K900 Series
In line Catch Basin
Point Catch Basin
K620 Series
K630 Series
In line trash buckets
fit the 900 series in line catch basin for the 4" and 8" systems.
Shallow trash bucket
fit the 620 series point catch basin and 900 series for 12" systems.
Deep trash buckets
fit the 630 series point catch basin and 900 series for the 12" systems.
Removable QuickLok bar
makes it easy to remove the grate for access to the catch basin
Rubberized plastic ends
to connect channels.
Riser
can be cut down to adjust height.
Side drill-outs
allow connection to other channels.
Removable QuickLok bar
makes it easy to remove the grate for access to the catch basin
Variety of 4",6",8"
schedule 40 spigots.
Edge Rail
available in galvanized or stainless steel.
Polymer Concrete
a durable material made from polyester resin binder reinforced by mineral aggregates and fillers
Spigot to match ACO Foul Air Trap
are available on all catch basin systems.
Removable QuickLok bar
makes it easy to remove the grate for access to the catch basin
All trash buckets are supported within the polymer concrete top section.
Catch Basins- to suit K100/ KS100
Catch Basins are available with integrally cast in galvanized (G) or stainless steel (S) edge rails. Grates are secured with removable QuickLok bars.
4" (100mm) wide Trench Drain Catch Basin Parts Listcb-k1-table Part No
Weight - lbs
K100
KS100
K1-901 In-line catch basin - 19.69” (0.5m)
94608
94609
52.6
Type 900 In-line plastic trash bucket
01498
1.1
K1-621 catch basin - 19.69” (0.5m)
94617
94618
55.8
K1-631 catch basin - 19.69” (0.5m)
94631
94632
65.8
Type 600 Optional riser
99902
10.0
Foul air trap - fits both 910 & 610 basins
90854
1.2
4" (100mm) 100mm wide Trench Drain Catch Basin Supporting Documents
FAT - Foul Air Trap Adapter - 4" pipe size only1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
K1-901G
K1-901S
K1-621G
K1-621S
K1-631G
K1-631S
28.45" (722.5mm)
41.11" (1044.3mm)
29.11" (739.5mm)
Catch Basins- to suit K200/ KS200
Catch Basins are available with integrally cast in galvanized (G) or stainless steel (S) edge rails. Grates are secured with removable QuickLok bars.
K2-902G
K2-902S
K2-621G
K2-621S
K2-631G
K2-631S
8" (200mm) wide Trench Drain Catch Basin Parts Listcb-k2-table Part No
Weight
K200
KS200
lbs
K2-902 In-line catch basin - 19.69” (0.5m)
94611
94612
68.0
Type 900 In-line plastic trash bucket
01399
1.2
K2-621 catch basin - 19.69” (0.5m)
94520
94621
91.0
K2-631 catch basin - 19.69” (0.5m)
94633
94634
101.0
Type 600 Optional riser
99902
10.0
Foul air trap - fits both 910 & 610 basins
90854
1.2
8" (200mm) wide Trench Drain Catch Basin Supporting Documents
FAT - Foul Air Trap - 4" pipe size only1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
33.18" (842.7mm)
37.64" (956mm)
49.63" (1260.8mm)
K3-903G
K3-903S
K3-904G
K3-904S
Catch Basins- to suit K300/ KS300
Catch Basins are available with integrally cast in galvanized (G) or stainless steel (S) edge rails. Grates are secured with removable QuickLok bars.
12" (300mm) wide Trench Drain Catch Basin Parts Listcb-k3-table Part No
Weight
K300
KS300
lbs
K3-903 In-line catch basin - 19.69” (0.5m)
94614
94615
88.0
K3-904 In-line catch basin - 19.69” (0.5m)
94635
94636
98.0
Type 600 Optional riser
99902
10.0
Type 600 plastic trash bucket - short
98653
3.5
Type 600 plastic trash bucket - deep
98665
4.0
Foul air trap
90854
1.2
12" (300mm) wide Trench Drain Catch Basin Supporting Documents
FAT - Foul Air Trap - 4" pipe size only1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
37.64" (956mm)
49.63" (1260.8mm)
Productos
Sistemas para profundidad restringida.
Los productos siguientes se pueden utilizar en una variedad de aplicaciones con requisitos especiales para la instalacion de drenaje.
Clic en esta barra para ver los productos.
